Home / Products & capabilities
What we supply
Products & capabilities.
Four lead aviation lines, supported by electro-mechanical, marine, lighting and industrial supply, and by design and engineering consultancy.
Airfield ground lighting (AGL)
Complete AGL packages and individual items for new-build, upgrade and maintenance works at airports, airfields and military aerodromes.

Lighting systems
- Approach lighting
- Runway edge, threshold and runway end lights
- Taxiway edge and centreline lights
- Apron lighting and floodlighting
- Runway guard lights (RGL)
- PAPI and APAPI approach path indicators
Signs & visual aids
- Airfield guidance signs, illuminated and non-illuminated: mandatory, location and direction
- Wind direction indicators (windcones)
- Airfield liner posts
- Signal light guns
Power & control
- Cables, isolating transformers and connector kits
- Airfield lighting control and monitoring, with local, PC and remote control
- Constant current regulators (CCR) and power units
- Solar and portable airfield lighting for temporary, emergency and remote sites
- Airfield lamps
LED technology
- Elevated and inset LED fittings
- LED technology for lower energy use and less maintenance.
- Intensity settings
- To ICAO high, medium and low requirements.
- Series-circuit, solar and portable options
- For permanent, temporary and emergency installations.
Typical applications
- Civil airports
- Regional airfields
- Military aerodromes
- Temporary and emergency runways
- AGL installation contractors






Heliport, helipad & helideck lighting
Complete lighting packages for surface-level and elevated (rooftop) heliports, hospital helipads and offshore helidecks.

Lighting & visual aids
- TLOF and FATO perimeter lighting, elevated and inset
- Touchdown/positioning marking (TD/PM) circle and H lighting
- Floodlighting
- Heliport beacons
- Approach and aiming lights
- HAPI and glide path indicators
- Visual alignment guidance systems
- Lit windsocks
Control & power
- Lighting controllers and power supplies
- Local, PC-based and remote control
- Pilot-activated (air-to-ground radio) control options
- Solar and portable heliport lighting
Applications
- Hospital helipads (NHS and private)
- Rooftop and elevated heliports
- Surface-level heliports
- Offshore platform and vessel helidecks
- Military, emergency and private sites
Standards we work to
- CAP 168
- Licensing of aerodromes
- CAP 437
- Standards for offshore helicopter landing areas
- CAP 1264
- Standards for helicopter landing areas at hospitals
- ICAO Annex 14
- Vol. II, Heliports
- ICAO Doc 9261
- Heliport Manual





Aviation obstruction lighting
Lighting that makes tall structures visible to pilots by day and night, including explosion-proof (Ex) lighting for hazardous areas.

Light types
- Low-intensity lights, steady red (Type A and B)
- Medium-intensity lights: Type A flashing white, Type B flashing red, Type C steady red, and dual A/C
- Twilight sensors for day/night switching
- GPS-synchronised flashing
- Explosion-proof (Ex) obstruction lights for hazardous-area zones
Power & monitoring
- Mains, DC and solar power options
- Power supply and control cabinets
- Single and double (duty/standby) units
- Redundancy, alarms and integrated UPS
- Fault monitoring and remote reporting
Where it is used
- Wind turbines and wind farms
- High-rise buildings
- Chimneys and stacks
- Telecom masts and towers
- Tower and mobile cranes
- Refineries and LNG facilities
- Offshore installations
Explosion-proof (Ex) obstruction lighting. For refineries, LNG terminals, petrochemical plants and offshore platforms, where lights must be suitable for hazardous-area zones. Tell us the zone classification and structure height and we will propose a compliant Ex solution.



Aviation spare parts
Spares that keep airfield, heliport and obstruction lighting in service, plus avionics-related items for operators and MROs.

Lighting & airfield spares
- Airfield lamps and lighting spares
- Spares for AGL, heliport and obstruction lighting systems
- Cables, transformers and connector kits
- CCR and power units
- Calibration tools
- Signal light guns
- Wind direction indicators and airfield liner posts
- Solar lighting for airfields, heliports, obstruction and military use
Avionics-related systems
- Aircraft lighting
- Communication and navigation systems
- Control panels and display units
- Flight data recorders
- Radar systems
- TCAS / Mode S solutions
Ordering spares
Send us part numbers, quantities and any certification or documentation requirements. We will source through the Delta group and our partners and OEMs, and quote in GBP.
Supporting your operation
- Airports & airfields
- Spares for planned maintenance and upgrades.
- MRO organisations
- Aviation and lighting parts to specification.
- Heliport operators
- Lighting spares for hospital and offshore sites.
Marine, electro-mechanical & industrial supply
Supporting lines for operators who want one UK supplier across aviation, marine and industrial requirements.

Electro-mechanical & marine spares
- Pumps, valves, strainers, compressors and electric motors
- Bearings, gearboxes, shaft seals and heat exchangers
- Filters, separators and purifiers
- Navigation and mooring buoys, marine lanterns, navigation towers and beacons
- Chains, shackles, swivels and synthetic strops
- Winches, hoists and lifting equipment
- Deck hardware, fenders and marine fittings
General & LED lighting
- LED area, flood and industrial lighting
- Solar lighting for remote sites
- Solar LED street and area lighting
- Lights for commercial marine use
- Lighting spares and replacement fittings
E&I materials
- LV and MV power and control cables
- Switchgear and panel components, panel indicators
- Transformers and accessories
- Earth fault indicators
- Solar PV modules, charge controllers, inverters and batteries
Flowmeters & industrial supplies
- Flowmeters and flow measurement
- Pressure, temperature and level instruments
- Pipe, pipeline components and hose reels
- Process controllers and recorders
- General industrial supplies to specification
Steel navigation buoys are fabricated to specification within the Delta group.
Design & engineering consultancy
From feasibility to compliance.
In addition to supplying heliport and helipad lighting systems, we act as your technical adviser from concept to detailed design.
Working with several partners and OEMs, we give clients a single point of responsibility and solutions aligned with ICAO Annex 14 and UK CAA certification requirements.
Planning a helipad or helideck? Send us your site plans for a hospital helipad, rooftop heliport or helideck upgrade. We will advise on the lighting, marking and compliance requirements under CAP 1264, CAP 437 and ICAO Annex 14, and propose a compliant lighting package.
Design
- Alignment of heliport and helipad requirements with master planning for multimodal integration
- Design development to ICAO Annex 14 and ICAO Doc 9261 for day/night VFR and IFR operations, including noise abatement and airspace path optimisation
- Heliport feasibility studies and infrastructure development plans
Airspace planning
- Topographic surveys and obstacle limitation assessments for aerodrome mapping data
- Procedure design for helicopter IFR operations, including night operations and degraded visual environment (DVE) scenarios
- Integration of helicopter routes within existing ATM frameworks, ensuring deconfliction and accommodating future UAM traffic concepts
Infrastructure
- MEPS engineering (mechanical, electrical, plumbing and structural) for heliport development
- Design of marking systems for helipad perimeters, helicopter stands, taxiways, FATO, TDPM and operational placarding
- Supply of lighting systems: helipad perimeter, TLOF and FATO lighting, glide path indicators, heliport beacons and security floodlighting
- Design and supply of operational support facilities: ATS interfaces, hangars, AWOS, windsocks, firefighting, fuelling and ground power units
- Passenger facilitation and support infrastructure
Regulatory compliance
- Full alignment with ICAO Annex 14 standards and UK CAA certification requirements
- Establishment and support of quality management systems, including ISO 9001 implementation for heliport operations
Maintenance
- Preventive and corrective maintenance manuals for facilities within the MEPS scope
Product images are illustrative. Specifications, certification and documentation are confirmed in each written proposal. Standards references describe the standards our products and designs are aligned with.
Let’s talk about
your project.
Send us your drawings, specification, BoQ or part numbers. We will reply with a compliant proposal in GBP, tailored to your programme.
Start an enquiry